Fermenter King Junior - 10 Litre Pressure Fermenter and Keg

10L Junior is the World's smallest and most affordable 10L pressure fermenter and keg.

10L Junior comes from the same tank mold as our Silver P.E.T. 10L King Kegs but is made using the clear P.E.T. material we use to manufacture our P.E.T. Pressure Fermenter and Unitank Range Like Apollo and Chubby.

Get two 10L Fermenter King Juniors as a great way to split single batch fermentations into two two fermenters to treat differently.

10L Fermenter King Junior relatively small size makes fermenting up to 8L of wort simple.

A spunding valve like our Spundy will be required to control the internal pressure of the fermenter.

After fermentation, you can carbonate your beer in your 10L Fermenter King Junior.

Simply attach your 10L Junior to your tap system or any hand held tap and serve directly out of the fermenter.

Alternatively, you can transfer carbonated beverages easily from Finto kegs, mini kegs and growlers.

Specifications:

Width = 24.5 cm at base

Height = 37.5 cm to top of posts on lid

IINSTRUCTION MANUAL AVAILABLE HERE

Please Note:
Phosphoric acid sanitisers should have the pH range between 2.2 - 2.8. This is about a 1.5 - 2ml of sanitiser in 1L of water. Above the pH of 2.8, the sanitiser fails the 30-second test to prevent microbial growth. Below 2.2ph range, the sanitiser will affect the flavour of beer.

Newer units of these now come with a white 25psi PRV rather than the red one shown in photos.

Heat does more damage to PET fermenters than chemicals. Above 50 degrees Celsius, the PET can soften and deform permanently. It is best to allow hot cleaning solutions to cool down to at least 40 degrees C before use.

Adhering to these recommendations will ensure the integrity of your fermenter tank for its useable life.