EVAFresh 6.3mm ID x 9.5mm OD - 12 Meter Roll

EVAFresh 6.3mm ID x 9.5mm OD line is best paired with our glycol/icebank systems or temprite serving systems. For those of you measuring in imperial (freedom units), the inner diameter is 1/4 inch. This size beverage tubing is excellent for long draw keg systems where your bar taps are further away from the kegs so a lower line resistance is required.

This 6.3mm size is not recommended for direct draw kegerators/keezer set ups as it would require up to 8 meters of line per tap. For these types of keg systems, use EVAFresh 4mm or 5mm

EVAFresh contains an inner barrier made from a proprietary polymer that provides excellent oxygen protection while preventing Co2 loss in your beverage. Your beer will stay fresher for longer and not loose carbonation. With EVAFresh tubing you'll be able to keep the freshness in your beer and beverages, even if the liquid has been sitting in the line between pours.

EVAFresh has an internal surface that is incredibly smooth while remaining almost entirely impermiable to oxygen. This unique quality makes it extremely difficult for bacteria and other microbes to establish inside EVAFresh tubing.

The outter barrier is made from EVA material that seals well when used push in fittings and is much easier to attach to barbed disconnects than our previous bevearge line. EVA outter barrier gives the tubing excellent flexibility so the line is far less likely to kink or crack when it is bent or coiled.
Pressure Rating (with 1.5safety factor) 30C - 1.4 MPa (200psi) 50C - 0.7MPa (100psi)