CO2 Gas Cylinders 0.9 kg (Full)

SKU: 4344

CO2 Gas Cylinders 0.9 kg (Full)

SKU: 4344
$65.00
Total: $65.00

Get Sharable Link

CO2 Gas Cylinders .9kg (full)

A certified, small cylinder that holds .9Kg of CO2!

These cylinders are easier to transport, carry and store because of their small size.

Easier to conceal in cupboards/under counters.

Based on 6grams per litre for dispensing and 6grams per litre carbonating:

This little cylinder packs enough CO2 gas to push about 150L of beer or approx 8x 19L corny kegs. 

You'll be able to carbonate and dispense approx 4 corny kegs.

Once the cylinder is empty there are many places around Australia where it can be filled or exchanged for a full one. 

Click the "Stockists" link up the top of the page (or at the bottom of the side menu for mobile) to see a map of these locations.

This will usually cost about $25 - $35 for this cylinder but prices may vary so always consult your C02 refill or cylinder supplier for accurate pricing.

These cylinders should never be operated inverted. The valve must always be upright. 

Dimensions:  370mm to top of cap

                      330mm to top of valve

                      100mm wide

Safety Data Sheet Available Here

CO2 Gas Cylinders .9kg (full)

A certified, small cylinder that holds .9Kg of CO2!

These cylinders are easier to transport, carry and store because of their small size.

Easier to conceal in cupboards/under counters.

Based on 6grams per litre for dispensing and 6grams per litre carbonating:

This little cylinder packs enough CO2 gas to push about 150L of beer or approx 8x 19L corny kegs. 

You'll be able to carbonate and dispense approx 4 corny kegs.

Once the cylinder is empty there are many places around Australia where it can be filled or exchanged for a full one. 

Click the "Stockists" link up the top of the page (or at the bottom of the side menu for mobile) to see a map of these locations.

This will usually cost about $25 - $35 for this cylinder but prices may vary so always consult your C02 refill or cylinder supplier for accurate pricing.

These cylinders should never be operated inverted. The valve must always be upright. 

Dimensions:  370mm to top of cap

                      330mm to top of valve

                      100mm wide

Safety Data Sheet Available Here

Why Choose Keg King

Product Support

Our experienced brewing specialists are available 7 days a week to help with product setup, troubleshooting, and brewing advice

Contact

(03) 9089 0122
Mon - Fri 9:30am-5:30pm

Email

info@kegking.com.au
Fast Local Support Team

Knowledge Base

200+ Help Articles, 190+ Videos
Available 24/7