Beer Line Gas Line EVAFresh - 3MM X 8MM - 3 Metre Roll (3m)
$12.00
In stock
SKU
13255P3
The 3mm ID x 8mm OD EVAFresh line provides brewers with the ability to use less line length between the keg and the tap.
EVAFresh beer line
EVAFresh walled tubing is made with an EVA outter wall and also an inner proprietary polymer barrier.
The 3mm ID x 8mm OD EVAFresh line provides brewers with the ability to use less line length between the keg and the tap due to its narrower internal diameter.
We recommend 0.35 to 0.7 metres per tap on shorter direct draw systems like kegerators and keezer builds.
This 3mm ID line is handy for tidyng up the line lengths in your draught system and is intended for use with our DM variety Push-in fittings in the 8mm or 5/16 sizes.
What is EVAfresh?
EVAFresh contains an inner barrier made from a proprietary polymer that provides excellent oxygen protection while preventing Co2 loss in your beverage. Your beer will stay fresher for longer and not loose carbonation. With EVAFresh tubing you'll be able to keep the freshness in your beer and beverages, even if the liquid has been sitting in the line between pours.
EVAFresh has an internal surface that is incredibly smooth while remaining almost entirely impermiable to oxygen. This unique quality makes it extremely difficult for bacteria and other microbes establish inside EVAFresh tubing.
The outter barrier is made from EVA material that seals well when used push in fittings and is much easier to attach to barbed disconnects than our previous bevearge line. EVA outter barrier gives the tubing excellent flexibility so the line is far less likely to kink or crack when it is bent or coiled.
How to fit 3mm beer line on 6mm barbs
The extremely narrow 3mm ID is impossible to fit on 6mm barbs found on disconnects and shanks.
To attach the 3mm ID line to gas and liquid disconnects, we recommend purchasing MFL variety with these DM Adaptors
To attach the 3mm ID line to shanks, we recommend either these 5/8 DM Adaptors or these Push-in variety shanks
To attach the 3mm ID line to couplers, we recommed 5/8 DM Adaptors.
To attach 3mm ID line to a hand held serving device we would recommend this Pluto Gun.
More Information
| Ribbon | None |
|---|---|
| Discontinued | No |
| Order By Request | No |
| Sale | No |
| New | Yes |
Review
Write Your Own Review
Please verify your age
You must be 18 years or older to purchase this product.
If you are 18 or older, please accept our Terms & Conditions, and "Continue".
If you are 18 or older, please accept our Terms & Conditions, and "Continue".