For the best chance of delivery before Christmas, we advise placing your orders no later than December 18th.

2.6kg CO2 Gas Cylinder FULL + MKX Regulator Special

Rating:
100% of 100
$105.00
In stock
SKU
4346
- +

Coupled together our most popular selling gas cylinder paired with our most popular gas regulator. A great pair of essential brewery and dispense equipment for a fantastic price!

This 2.6kg cylinder is our most popular CO2 cylinder. It's small enough to take with you camping or to a party, put inside a kegerator or hang in the cylinder bracket included with our Keg Masters but large enough to dispense many kegs. Purchasing your own CO2 cylinder is generally cheaper than renting from a gas supplier for periods longer than 12 months.

Features:
- Australian Standard Approved
- Hold 2.6kg of gas when full
Dimensions 47cm high x 14cm diameter
- Comes with included carry handle for easy of transport and protection of valve
- Will fit in Keg Master Series 2 and Series 3 Kegerators without reducing the number of kegs it can hold

Typically you will use about 6g per litre of CO2 for carbonating and/or 6g per liter to dispense from a kegerator. If you are brewing and carbonating your own beer, without accounting for any wastage you should be able to carbonate and dispense about 200L or over 10 x 19L kegs. If you are purchasing commercial beer which is already carbonated you should be able to dispense about 400L or 8 x 50L kegs.

Once the cylinder is empty there are many places around Australia where it can be filled or exchanged for a full one. Click the "Stockists" link up the top of the page (or at the bottom of the side menu for mobile) to see a map of these locations. This will usually cost about $25 - $35 for this 2.6kg cylinder.

To prevent prematurely emptying your cylinder it is highly recommended to thoroughly check for leaks and preform a pressure check. 

View Safety Data Sheet here.

View Australian WorkSafe Approval here.

The new MKIII regulator has all the advantages of the older MKII model but several internal improvements have been made to make the regulator even more reliable.

NEW IMPROVEMENTS IN SEAT AND SEAT CAP DESIGN
The most common regulator failure that is seen in the industry is failure with the seat and seat cap assembly (parts 10-17).  The issue is almost always caused by contamination in these parts.  In the past most regulators in Australia come with a single sintered filter on the inlet spigot (nut and stem).  The new Keg King MKIII model gas double filtration and includes a second sintered filter on the underside of the seat cap assembly (part 17)

NEW IMPROVEMENTS IN SEAL COMPOSITION
The seat and seat cap assembly has also been re-designed and now takes advantage of ultra-high molecular weight polyethylene (UHMWPE) the new UHMWPE is significantly better in chemical resistance and stability than the Plumber's Tape that is normally used in other brand names.

FULLY ENCAPSULATED SEAT TECHNOLOGY
The regulators have also been designed so that the whole seat and seat cap assembly (parts 10-17) are manufactured as a fully encapsulated part.  This adds to the reliability and in the case that the regulator is eventually opened up for servicing it reduces the chance of this assembly becoming contaminated by the service agent.  This further improves reliability.

Suitable for CO2, Oxygen, Argon and Nitrogen Our MK III regulator is made with high quality machined brass body and can be used on multiple gasses.

The regulator has a large body for high flow rates and comes with a precision diaphragm for more accurate adjustment. The Regulator also has a large adjustment knob for easy adjustment.

This regulator is can also be used on a range of different gasses including: CO2, Oxygen, Argon, Helium and Nitrogen.

The standard type 30 nut and stem comes fitted to the regulator for CO2 and CO2/nitrogen mixed gasses. 

Other nut and stems can be interchanged:
Type 10 Nut and Stem : Oxygen, Argon, Helium 
Type 30 Nut and Stem : CO2, CO2/Nitrogen Mixed Gas 
Type 50 Nut and Stem : Nitrogen

Exploded diagram and parts list

Service Kit

Flash Christmas Sale

Coupled together our most popular selling gas cylinder paired with our most popular gas regulator. A great pair of essential brewery and dispense equipment for a fantastic price!

This 2.6kg cylinder is our most popular CO2 cylinder. It's small enough to take with you camping or to a party, put inside a kegerator or hang in the cylinder bracket included with our Keg Masters but large enough to dispense many kegs. Purchasing your own CO2 cylinder is generally cheaper than renting from a gas supplier for periods longer than 12 months.

Features:
- Australian Standard Approved
- Hold 2.6kg of gas when full
Dimensions 47cm high x 14cm diameter
- Comes with included carry handle for easy of transport and protection of valve
- Will fit in Keg Master Series 2 and Series 3 Kegerators without reducing the number of kegs it can hold

Typically you will use about 6g per litre of CO2 for carbonating and/or 6g per liter to dispense from a kegerator. If you are brewing and carbonating your own beer, without accounting for any wastage you should be able to carbonate and dispense about 200L or over 10 x 19L kegs. If you are purchasing commercial beer which is already carbonated you should be able to dispense about 400L or 8 x 50L kegs.

Once the cylinder is empty there are many places around Australia where it can be filled or exchanged for a full one. Click the "Stockists" link up the top of the page (or at the bottom of the side menu for mobile) to see a map of these locations. This will usually cost about $25 - $35 for this 2.6kg cylinder.

To prevent prematurely emptying your cylinder it is highly recommended to thoroughly check for leaks and preform a pressure check. 

View Safety Data Sheet here.

View Australian WorkSafe Approval here.

 

The new MKX regulator has all the advantages of the older MKIII model but several improvements have been made:

NEW 70PSI Operation with the NEW Green 70PSI Pessure Relief Valve.

The new PRV allows for higher pressure processes and reliable pressure relief at 70PSI.

NEW output options.

Choose from a standard 6mm Barb Fitting or use the reliable DM Push-in Fitting. It’s up to you!

NEW more rugged, durable gauge protection on high and low pressure gauges

 

IMPROVEMENTS IN SEAT AND SEAT CAP DESIGN
The most common regulator failure that is seen in the industry is failure with the seat and seat cap assembly (parts 10-17).  The issue is almost always caused by contamination in these parts.  In the past most regulators in Australia come with a single sintered filter on the inlet spigot (nut and stem).  The Keg King MKX model gas double filtration and includes a second sintered filter on the underside of the seat cap assembly (part 17)

IMPROVEMENTS IN SEAL COMPOSITION
The seat and seat cap assembly has also been re-designed and now takes advantage of ultra-high molecular weight polyethylene (UHMWPE) the new UHMWPE is significantly better in chemical resistance and stability than the Plumber's Tape that is normally used in other brand names.

FULLY ENCAPSULATED SEAT TECHNOLOGY
The regulators have also been designed so that the whole seat and seat cap assembly (parts 10-17) are manufactured as a fully encapsulated part.  This adds to the reliability and in the case that the regulator is eventually opened up for servicing it reduces the chance of this assembly becoming contaminated by the service agent.  This further improves reliability.

Suitable for CO2, Oxygen, Argon and Nitrogen Our MK III regulator is made with high quality machined brass body and can be used on multiple gasses.

The regulator has a large body for high flow rates and comes with a precision diaphragm for more accurate adjustment. The Regulator also has a large adjustment knob for easy adjustment.

This regulator is can also be used on a range of different gasses including: CO2, Oxygen, Argon, Helium and Nitrogen.

The standard type 30 nut and stem comes fitted to the regulator for CO2 and CO2/nitrogen mixed gasses. 

Other nut and stems can be interchanged:
Type 10 Nut and Stem : Oxygen, Argon, Helium 
Type 30 Nut and Stem : CO2, CO2/Nitrogen Mixed Gas 
Type 50 Nut and Stem : Nitrogen

Exploded diagram and parts list

Service Kit

Flash Christmas Sale

More Information
RibbonNone
DiscontinuedNo
Order By RequestNo
SaleNo
NewNo
Write Your Own Review
You're reviewing:2.6kg CO2 Gas Cylinder FULL + MKX Regulator Special
Your Rating